Skip to Content

Book Series

Handbook Series for Mechanical Engineering

New and Published Books

1-10 of 10 results in Handbook Series for Mechanical Engineering
  • Page:
  • 1
  1. Biomedical Technology and Devices, Second Edition

    Edited by James E. Moore Jr, Duncan J. Maitland

    Series: Handbook Series for Mechanical Engineering

    Biomedical Technology and Devices, Second Edition focuses on the equipment, devices, and techniques used in modern medicine to diagnose, treat, and monitor human illnesses. Gathering together and compiling the latest information available on medical technology, this revised work adds ten new...

    Published June 24th 2013 by CRC Press

  2. The CRC Handbook of Mechanical Engineering, Second Edition

    Edited by D. Yogi Goswami

    Series: Handbook Series for Mechanical Engineering

    Since the first edition of this comprehensive handbook was published ten years ago, many changes have taken place in engineering and related technologies. Now, this best-selling reference has been updated for the 21st century, providing complete coverage of classic engineering issues as well as...

    Published September 28th 2004 by CRC Press

  3. Biomedical Technology and Devices Handbook

    Series: Handbook Series for Mechanical Engineering

    Concise yet comprehensive, the Biomedical Technology and Devices Handbook illuminates the equipment, devices, and techniques used in modern medicine to diagnose, treat, and monitor human illnesses. With topics ranging from the basic procedures like blood pressure measurement to cutting-edge imaging...

    Published August 13th 2003 by CRC Press

  4. Opto-Mechatronic Systems Handbook

    Techniques and Applications

    Edited by Hyungsuck Cho

    Series: Handbook Series for Mechanical Engineering

    Opto-mechatronics-the fusion of optical and mechatronic technologies-has been integral in the evolution of machines, systems, and products that are smaller and more precise, more intelligent, and more autonomous. For the technology to reach its full potential, however, engineers and researchers...

    Published September 29th 2002 by CRC Press

  5. Fuel Cell Technology Handbook

    Edited by Gregor Hoogers

    Series: Handbook Series for Mechanical Engineering

    Fuel cell systems have now reached a degree of technological maturity and appear destined to form the cornerstone of future energy technologies. But the rapid advances in fuel cell system development have left current information available only in scattered journals and Internet sites. The even...

    Published September 26th 2002 by CRC Press

  6. Inverse Engineering Handbook

    Edited by Keith A. Woodbury

    Series: Handbook Series for Mechanical Engineering

    Inverse problems have been the focus of a growing number of research efforts over the last 40 years-and rightly so. The ability to determine a "cause" from an observed "effect" is a powerful one. Researchers now have at their disposal a variety of techniques for solving inverse problems, techniques...

    Published September 24th 2002 by CRC Press

  7. Hazardous and Radioactive Waste Treatment Technologies Handbook

    Edited by Chang H. Oh

    Series: Handbook Series for Mechanical Engineering

    Many books have been written on hazardous waste and nuclear waste separately, but none have combined the two subjects into one single-volume resource. Hazardous and Radioactive Waste Treatment Technologies Handbook covers the technologies, characteristics, and regulation of both hazardous chemical...

    Published June 26th 2001 by CRC Press

  8. Computational Intelligence In Manufacturing Handbook

    Edited by Jun Wang, Andrew Kusiak

    Series: Handbook Series for Mechanical Engineering

    Despite the large volume of publications devoted to neural networks, fuzzy logic, and evolutionary programming, few address the applications of computational intelligence in design and manufacturing. Computational Intelligence in Manufacturing Handbook fills this void as it covers the most recent...

    Published December 26th 2000 by CRC Press

  9. Handbook of Heating, Ventilation, and Air Conditioning

    Edited by Jan F. Kreider

    Series: Handbook Series for Mechanical Engineering

    Over the past 20 years, energy conservation imperatives, the use of computer based design aids, and major advances in intelligent management systems for buildings have transformed the design and operation of comfort systems for buildings. The "rules of thumb" used by designers in the1970s are no...

    Published December 25th 2000 by CRC Press

  10. The CRC Handbook of Mechanical Engineering, Second Edition

    Series: Handbook Series for Mechanical Engineering

    During the past 20 years, the field of mechanical engineering has undergone enormous changes. These changes have been driven by many factors, including:the development of computer technologyworldwide competition in industryimprovements in the flow of informationsatellite communicationreal time...

    Published March 23rd 1998 by CRC Press

  • Page:
  • 1

Search for Book Series