Skip to Content

Book Series

Mechanical and Aerospace Engineering Series

Series Editor: Frank Kreith, Darrell W. Pepper

New and Published Books

1-10 of 55 results in Mechanical and Aerospace Engineering Series
  1. Handbook of Hydrogen Energy

    Edited by S.A. Sherif, D. Yogi Goswami, E.K. (Lee) Stefanakos, Aldo Steinfeld

    Series: Mechanical and Aerospace Engineering Series

    Can hydrogen and electricity supply all of the world’s energy needs? Handbook of Hydrogen Energy thoroughly explores the notion of a hydrogen economy and addresses this question. The handbook considers hydrogen and electricity as a permanent energy system and provides factual information based on...

    Published July 28th 2014 by CRC Press

  2. Fuel Cells

    Principles, Design, and Analysis

    By Shripad T. Revankar, Pradip Majumdar

    Series: Mechanical and Aerospace Engineering Series

    Fuel Cells: Principles, Design, and Analysis considers the latest advances in fuel cell system development and deployment, and was written with engineering and science students in mind. This book provides readers with the fundamentals of fuel cell operation and design, and incorporates techniques...

    Published May 27th 2014 by CRC Press

  3. Introduction to the Design and Behavior of Bolted Joints, Fourth Edition

    Gasketed Bolted Joints

    By James R. Payne

    Series: Mechanical and Aerospace Engineering Series

    Redesigned for increased accessibility, the fourth edition of this bestseller has been divided into two separate but complementary volumes. Each volume contains the basic information useful to bolting experts in any industry, but because the two volumes are more clearly focused, they are easier and...

    Published April 20th 2014 by CRC Press

  4. Industrial Waste Water Treatment and Water Recovery

    By Brian E. Clark

    Series: Mechanical and Aerospace Engineering Series

    Realizing the importance of water as a non-renewable resource, today's industry aims to use water more efficiently and to treat industrial wastewaters to meet discharge criteria. Industrial Waste Water Treatment and Water Recovery provides discussion of conventional and advanced methods to remove...

    Published April 20th 2014 by CRC Press

  5. Air Distribution in Buildings

    By Essam E. Khalil

    Series: Mechanical and Aerospace Engineering Series

    Air Distribution in Buildings is a concise and practical guide to air distribution system design and managing air conditioning systems in buildings. Making use of 40 years of experience in the design of air conditioning and ventilations systems, and other electromechanical services, this structured...

    Published November 21st 2013 by CRC Press

  6. Principles of Sustainable Energy Systems, Second Edition

    By Frank Kreith, Susan Krumdieck

    Series: Mechanical and Aerospace Engineering Series

    Completely revised and updated, Principles of Sustainable Energy Systems, Second Edition presents broad-based coverage of sustainable energy sources and systems. The book is designed as a text for undergraduate seniors and first-year graduate students. It focuses on renewable energy technologies,...

    Published August 18th 2013 by CRC Press

  7. Weatherization and Energy Efficiency Improvement for Existing Homes

    An Engineering Approach

    By Moncef Krarti

    Series: Mechanical and Aerospace Engineering Series

    Providing a proven set of energy efficiency measures and opportunities for saving energy and reducing operating costs for existing homes, this volume presents general tools and procedures for performing home weatherization such as insulation improvements as well as methods to reduce air leakage....

    Published April 24th 2012 by CRC Press

  8. Nanotechnology

    Understanding Small Systems

    By Ben Rogers, Jesse Adams, Sumita Pennathur

    Series: Mechanical and Aerospace Engineering Series

    Although nanotechnology is a hot topic, the search for a true introductory textbook usually comes up cold. Students in a first course on nanotechnology come from a wide variety of backgrounds, so the text must not assume understanding of too much background material, nor be too focused on any...

    Published October 24th 2011 by CRC Press

  9. Thermodynamics for Engineers

    By Kau-Fui Vincent Wong, Kaufui Vincent Wong

    Series: Mechanical and Aerospace Engineering Series

    Aspiring engineers have long needed a text that prepares them to use thermodynamics in professional practice. Thermodynamics instructors need a concise textbook written for a one-semester undergraduate course-a text that foregoes clutter and unnecessary details but furnishes the essential facts and...

    Published September 1st 2011 by CRC Press

  10. Thermodynamics for Engineers, 2nd Edition

    By Kaufui Vincent Wong

    Series: Mechanical and Aerospace Engineering Series

    Aspiring engineers need a text that prepares them to use thermodynamics in professional practice. Thermodynamics instructors need a concise textbook written for a one-semester undergraduate course—a text that foregoes clutter and unnecessary details but furnishes the essential facts and...

    Published August 4th 2011 by CRC Press