Skip to Content

Books by Subject

Building Services Engineering Books

You are currently browsing 91–100 of 132 new and published books in the subject of Building Services Engineering — sorted by publish date from newer books to older books.

For books that are not yet published; please browse forthcoming books.

New and Published Books – Page 10

  1. Building Services Design Methodology

    A Practical Guide

    By David Bownass, D. Bownass

    Building Services Design Methodology clearly sets out and defines the building services design process from concept to post-construction phase. By providing a step-by-step methodology for students and practitioners of service engineering, the book will encourage improved efficiency (both in...

    Published October 19th 2000 by Routledge

  2. Building Energy Management Systems

    An Application to Heating, Natural Ventilation, Lighting and Occupant Satisfaction, 2nd Edition

    By Geoff Levermore

    Energy management systems are used to monitor building temperature inside and outside buildings and control the boilers and coolers. Energy efficiency is a major cost issue for commerce and industry and of growing importance on university syllabuses. Fully revised and updated, this text considers...

    Published May 18th 2000 by Routledge

  3. Cutting the Cost of Cold

    Affordable Warmth for Healthier Homes

    Edited by Fergus Nicol, Janet Rudge

    In this book academics and practitioners from a wide range of disciplines provide a survey of research into buildings, epidemiology and medical issues, followed by an assessment of the tools available to the practitioner. The book goes on to provide clear guidance on putting theory into...

    Published April 13th 2000 by Routledge

  4. Indoor Air Quality Issues

    By David Hansen

    Examines problems such as microbial contamination, building design, ventilation systems and psychological effects. It uses a multi-disciplined approach in examining the causes and effects of the interactions between occupants and non-industrial environments. The text also provides the reader with...

    Published April 5th 2000 by CRC Press

  5. BRE Building Elements: Building Services

    Performance, Diagnosis, Maintenance, Repair and the Avoidance of Defects (BR 404)

    By H.W. Harrison

    This book is about the entire range of fuelled, piped, ducted, wired and mechanical facilities in the UK's building stock for space heating and cooling, electricity and communications, ventilation, plumbing and drainage, mechanical handling and so on. It draws on BRE's activities over many year in...

    Published January 1st 2000 by IHS BRE Press

  6. Natural Ventilation in Atria for Environmental and Smoke Control

    An Introductory Guide (BR 375)

    By C Williams

    First published in 1999. Routledge is an imprint of Taylor & Francis, an informa company....

    Published September 1st 1999 by IHS BRE Press

  7. Lighting

    6th Edition

    By D.C. Pritchard

    Lighting, now in its sixth edition, is the standard text on the principles and practice of lighting interiors and exteriors. The book introduces all the main principles of light and colour, along with the design of general lighting schemes. It complies with the CIBSE lighting code and guides,...

    Published January 18th 1999 by Routledge

  8. Calculating Access to Skylight, Sunlight and Solar Radiation on Obstructed Sites in Europe

    (BR 379)

    By P.J. Littlefair

    Conventional solar prediction techniques tend to assume an unobstructed site, but nearly all urban and suburban sites are obstructed to some degree. This report contains manual tools to find, for almost all of Europe, how much skylight, sunlight and solar gain reach the outside of an obstructed...

    Published January 1st 1999 by Unknown

  9. Solar Shading of Buildings

    (BR 364)

    By P. J. Littlefair

    First published in 1999. Routledge is an imprint of Taylor & Francis, an informa company....

    Published January 1st 1999 by IHS BRE Press

  10. HVAC Control Systems

    Modelling, Analysis and Design

    By Chris P. Underwood

    This important new book bridges the gap between works on classical control and process control, and those dealing with HVAC control at a more elementary level, which generally adopt a qualitative and descriptive control. Both advanced level students and specialist practitioners will welcome the...

    Published December 10th 1998 by Routledge