Skip to Content

Books by Subject

Microelectronics Books

You are currently browsing 1–10 of 16 new and published books in the subject of Microelectronics — sorted by publish date from newer books to older books.

For books that are not yet published; please browse forthcoming books.

New and Published Books

  1. The Essential Guide to Serial ATA and SATA Express

    By David A. Deming

    Used in laptop and desktop computers, low-end servers, and mobile devices, Serial ATA (Advance Technology Attachment), or SATA, is the pervasive disk storage technology in use today. SATA has also penetrated the enterprise computing environment by adding hardware components for fail-over, extending...

    Published October 8th 2014 by Auerbach Publications

  2. Microcontrollers

    High-Performance Systems and Programming

    By Julio Sanchez, Maria P. Canton

    Focusing on the line of high-performance microcontrollers offered by Microchip, Microcontrollers: High-Performance Systems and Programming discusses the practical factors that make the high-performance PIC series a better choice than their mid-range predecessors for most systems. However, one...

    Published October 27th 2013 by CRC Press

  3. Electrical Measuring Instruments and Measurements

    By S.C. Bhargava

    This book, written for the benefit of engineering students and practicing engineers alike, is the culmination of the author's four decades of experience related to the subject of electrical measurements, comprising nearly 30 years of experimental research and more than 15 years of teaching at...

    Published December 26th 2012 by CRC Press

  4. Applications of Field-Programmable Gate Arrays in Scientific Research

    By Hartmut F.-W. Sadrozinski, Jinyuan Wu

    Focusing on resource awareness in field-programmable gate array (FPGA) design, Applications of Field-Programmable Gate Arrays in Scientific Research covers the principle of FPGAs and their functionality. It explores a host of applications, ranging from small one-chip laboratory systems to...

    Published December 6th 2010 by CRC Press

  5. Embedded Multiprocessors

    Scheduling and Synchronization, Second Edition

    By Sundararajan Sriram, Shuvra S. Bhattacharyya

    Series: Signal Processing and Communications

    Techniques for Optimizing Multiprocessor Implementations of Signal Processing Applications An indispensable component of the information age, signal processing is embedded in a variety of consumer devices, including cell phones and digital television, as well as in communication infrastructure,...

    Published February 2nd 2009 by CRC Press

  6. Handbook of Algorithms for Physical Design Automation

    Edited by Charles J. Alpert, Dinesh P. Mehta, Sachin S. Sapatnekar

    The physical design flow of any project depends upon the size of the design, the technology, the number of designers, the clock frequency, and the time to do the design. As technology advances and design-styles change, physical design flows are constantly reinvented as traditional phases are...

    Published November 11th 2008 by Auerbach Publications

  7. What Every Engineer Should Know About Developing Real-Time Embedded Products

    By Kim R. Fowler

    Series: What Every Engineer Should Know

    You can find them in your wristwatch or MP3 player; they perform specific functions in washing machines, traffic lights, and even pacemakers. Embedded systems are pervasive, ubiquitous, and widespread throughout our daily lives. Developing these real-time embedded products requires an understanding...

    Published October 23rd 2007 by CRC Press

  8. Sequential Logic

    Analysis and Synthesis

    By Joseph Cavanagh

    Until now, there was no single resource for actual digital system design. Using both basic and advanced concepts, Sequential Logic: Analysis and Synthesis offers a thorough exposition of the analysis and synthesis of both synchronous and asynchronous sequential machines. With 25 years of experience...

    Published June 1st 2006 by CRC Press

  9. Electronic Design Automation for Integrated Circuits Handbook - 2 Volume Set

    By Luciano Lavagno, Grant Martin, Louis Scheffer

    Series: Industrial Information Technology

    Electronic design automation (EDA) is among the crown jewels of electrical engineering. Without EDA tools, today's complex integrated circuits (ICs) would be impossible. Doesn't such an important field deserve a comprehensive, in-depth, and authoritative reference? The Electronic Design Automation...

    Published April 12th 2006 by CRC Press

  10. EDA for IC System Design, Verification, and Testing

    Edited by Louis Scheffer, Luciano Lavagno, Grant Martin

    Series: Electronic Design Automation for Integrated Circuits Hdbk

    Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The first volume, EDA for IC System Design, Verification, and Testing,...

    Published March 22nd 2006 by CRC Press

Forthcoming Books

  1. InfiniBand
    By David A. Deming
    To Be Published May 14th 2015

Find more forthcoming books