Skip to Content

Books by Subject

Automotive Technology & Engineering Books

You are currently browsing 1–10 of 70 new and published books in the subject of Automotive Technology & Engineering — sorted by publish date from newer books to older books.

For books that are not yet published; please browse forthcoming books.

New and Published Books

  1. Understanding Chemistry through Cars

    By Geoffrey M. Bowers, Ruth A. Bowers

    As the car anticipates its dance around the racetrack, the engine growls and pops, and all senses become immersed in the smell of exhaust vapors and the sounds of raw speed and excitement. As it turns out, these also are the sights, sounds, and smells of chemistry! The car is a great example of an...

    Published November 3rd 2014 by CRC Press

  2. Advanced Electric Drive Vehicles

    Edited by Ali Emadi

    Series: Energy, Power Electronics, and Machines

    Electrification is an evolving paradigm shift in the transportation industry toward more efficient, higher performance, safer, smarter, and more reliable vehicles. There is in fact a clear trend to move from internal combustion engines (ICEs) to more integrated electrified powertrains. Providing a...

    Published October 24th 2014 by CRC Press

  3. Automotive Technician Training: Entry Level 3

    Introduction to Light Vehicle Technology

    By Tom Denton

    A blended learning approach to automotive engineering at foundation level Used alongside the ATT Training online learning resources, this textbook covers everything that students need to learn in order to pass Introduction to Motor Vehicle Engineering (EL3) automotive courses. This book takes a...

    Published October 15th 2014 by Routledge

  4. Fundamentals of Machine Elements, Third Edition

    SI Version

    By Steven R. Schmid, Bernard J. Hamrock, Bo. O. Jacobson

    New and Improved SI Edition—Uses SI Units Exclusively in the Text Adapting to the changing nature of the engineering profession, this third edition of Fundamentals of Machine Elements aggressively delves into the fundamentals and design of machine elements with an SI version. This latest edition...

    Published July 18th 2014 by CRC Press

  5. Design and Simulation of Rail Vehicles

    By Maksym Spiryagin, Colin Cole, Yan Quan Sun, Mitchell McClanachan, Valentyn Spiryagin, Tim McSweeney

    Series: Ground Vehicle Engineering

    Keep Up with Advancements in the Field of Rail Vehicle Design A thorough understanding of the issues that affect dynamic performance, as well as more inventive methods for controlling rail vehicle dynamics, is needed to meet the demands for safer rail vehicles with higher speed and loads. Design...

    Published May 13th 2014 by CRC Press

  6. Automotive Technician Training: Theory

    By Tom Denton

    A blended learning approach to automotive engineering at levels one to three Produced alongside the ATT online learning resources, this textbook covers all the theory and technology sections that students need to learn in order to pass levels 1, 2 and 3 automotive courses. It is recommended by the...

    Published April 24th 2014 by Routledge

  7. Innovation and Industrialization in Asia

    Edited by Rajah Rasiah, Yeo Lin, Yuri Sadoi

    Existing accounts of East Asia’s meteoric growth and structural change has either been explained as one dictated essentially by markets with strong macroeconomic fundamentals, or a consequence of proactive governments. This book departs from such a dichotomy by examining inductively the drivers of...

    Published April 10th 2014 by Routledge

  8. Generation of Surfaces

    Kinematic Geometry of Surface Machining

    By Stephen P. Radzevich

    A commonly used practice in industry is the machining of sculptured part surfaces on a multiaxis numerical control (NC) machine. While this practice is vital, it is also a costly aspect of the surface generation process. After investing more than 40 years of research into the theory of part surface...

    Published February 3rd 2014 by CRC Press

  9. Convective Heat Transfer, Third Edition

    By Sadik Kakac, Yaman Yener, Anchasa Pramuanjaroenkij

    Intended for readers who have taken a basic heat transfer course and have a basic knowledge of thermodynamics, heat transfer, fluid mechanics, and differential equations, Convective Heat Transfer, Third Edition provides an overview of phenomenological convective heat transfer. This book combines...

    Published December 17th 2013 by CRC Press

  10. Mechanism Design

    Visual and Programmable Approaches

    By Kevin Russell, Qiong Shen, Raj S. Sodhi

    In the field of mechanism design, kinematic synthesis is a creative means to produce mechanism solutions. Combined with the emergence of powerful personal computers, mathematical analysis software and the development of quantitative methods for kinematic synthesis, there is an endless variety of...

    Published December 2nd 2013 by CRC Press

Forthcoming Books

  1. Applied Dynamics
    By Haim Baruh
    To Be Published December 22nd 2014
  2. Design and Control of Automotive Propulsion Systems
    By Zongxuan Sun, Guoming G. Zhu
    To Be Published January 9th 2015
  3. Mechanical Design of Machine Components, Second Edition
    By Ansel C. Ugural
    To Be Published February 23rd 2015
  4. Mechanical Fastening, Joining, and Assembly, Second Edition
    By James A. Speck
    To Be Published March 5th 2015
  5. Dual-Fuel Diesel Engines
    By Ghazi A. Karim
    To Be Published March 18th 2015

Find more forthcoming books